Dasuteele 750A・AH・AAH-S

About Dasuteele 750A・AH・AAH-S

Measured value of dioxins 0.015ng-TEQ / m³ N

It is a crematorium that uses a batch-type batch processing combustion method. By forcibly ventilating high-temperature air from nozzles installed at appropriate intervals in the secondary combustion chamber, this crematory has a structure that completely burns the unburned gas generated from the primary combustion. It is also possible to install the crematorium in a marine container or inside a trainer.

Characteristics of Dasuteele 750A・AH・AAH-S


【Furnace Structure】This is a large crematorium for pets that can cremate a 60kg dog in 2 hours. With our unique special pan and ceramic mat, the crematorium also shortens the cremation time and suppresses the odor after cremation.

【Emplacement Structure】Using the stretcher style, it is a structure that allows you to emplace as well as collect the remains conveniently. In addition, since the input door is an electric vertical slide type, the furnace body could be hidden and the decorative wall/door can be easily attached. It is ideal for a farewell in front of the furnace.

【Incineration capacity】Supports up to 60kg (Small animals to big-sized dogs). It is also possible to cremate multiple pets at once.

【Fuel】Kerosene, LP gas, City Gas

■ Control Panel and Temperature Management

The incineration temperature can be freely controlled with a simple switch operation.

Since you can check the temperature on the digital display, you can cremate according to your wishes:
"I want to keep the remains at a clean state at a lower temperature."
"I want to shorten the cremation time with a higher temperature."

■Compliance with Environmental Measures and Laws

By equipping the secondary burner as standard equipment, the unburned gas generated from the primary combustion chamber is efficiently reburned at a high temperature, and the generation of smoke and odor is suppressed to the maximum.
Each burner can be changed to a gas burner. Compared to oil burners, gas burners can significantly reduce the odor at the beginning of ignition and produce cleaner smoke.
It meets all the structural standards of the Waste Disposal and Public Cleansing Law for incinerators.
Additionally, since it is a model that can be equipped with a cyclone dust collector, it can limit the amount of dust generated and comply with regulations such as that of Soka City.