SUNTOY

サントイ株式会社

Dasuteele 560CS

About Dasuteele 560CS

Measured value of dioxins 0.011ng-TEQ / m³ N

It is a crematorium that uses a batch-type batch processing combustion method. By forcibly ventilating high-temperature air from nozzles installed at appropriate intervals in the secondary combustion chamber, this crematory has a structure that completely burns the unburned gas generated from the primary combustion.

Characteristics of Dasuteele 560CS

■Structure

【Furnace Structure】By using a special material for the combustion chamber, this crematorium can shortens the arrival time to 800 ° and the cooling time. With our unique special pan and ceramic mat, the crematorium also shortens the cremation time and suppresses the odor after cremation.
Additionally, you can insert a camera to the crematorium to check the status of the cremation. If you install a monitor in an office, you can check the situation inside the furnace from there, which is very convenient.

【Emplacement Structure】It is a structure that allows you to pull out the pan from inside the furnace onto the opened door to collect the remains but it is also possible to change it to a stretcher style. By changing it to a stretcher style, it will also be more convenient for women to pull the pan in and out.

【Incineration capacity】Supports up to 20kg (Small animals to mid-sized dogs)

【Fuel】Kerosene, LP gas, City Gas

■ Control Panel and Temperature Management

The incineration temperature can be freely controlled with a simple switch operation.
Since you can check the temperature on the digital display, you can cremate according to your wishes:
"I want to keep the remains at a clean state at a lower temperature."

"I want to shorten the cremation time with a higher temperature."
In addition, the cremation time, combustion temperature, and cooling time of the primary and secondary combustion chambers can be set from the computer, enabling automatic operation.

■Camera in the furnace

You can attach a camera to the crematorium to check the status of the cremation. If you install a monitor in an office, you can check the situation inside the furnace from there, which is very convenient.

■Dustproof measures

It is equipped with a cyclone type dust collector, so dust is not generated even when using a cardboard casket.

■Compliance with Environmental Measures and Laws

By equipping the secondary burner as standard equipment, the unburned gas generated from the primary combustion chamber is efficiently reburned at a high temperature, and the generation of smoke and odor is suppressed to the maximum. Each burner can be changed to a gas burner. Compared to oil burners, gas burners can significantly reduce the odor at the beginning of the ignition and produce cleaner smoke.
It meets all the structural standards of the Waste Disposal and Public Cleansing Law for incinerators.
Additionally, since it is a model that can be equipped with a cyclone dust collector, it can limit the amount of dust generated and comply with regulations such as that of Soka City.